| Model | CL-F215-PL12BB-A |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 68 CFM |
| Max pressure | 2.95 mmH₂O |
| Max noise | 28.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Bumblebee |
CL-F215-PL12BB-A is a 25 mm thick 120 mm ARGB fan reaching 2000 RPM with 68 CFM and 2.95 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake CT120 EX ARGB Sync Bumblebee 3-Fan Pack
The CT120 EX ARGB Sync Bumblebee pack gives you three 120 mm fans at 25 mm thickness, so they fit standard case and radiator mounts. The 500–2000 RPM range and 68 CFM airflow point to strong open-air case ventilation, while the 2.95 mmH2O static pressure figure means the same fans can push through a radiator or dense mesh filter. Buyers should expect up to 28.5 dB(A) at the top end, with lower noise as RPM drops toward 500.
Each fan uses a hydraulic bearing and connects by 4-Pin PWM for speed control plus a separate 3-Pin ARGB header for lighting, so your motherboard needs both. The Bumblebee colour finish is listed, and ARGB sync is supported through the 3-pin connection. The data does not list a price or release year, so check the retailer for current pricing. Confirm your case or radiator accepts 25 mm thick 120 mm fans before ordering the three-pack.
Frequently asked questions
Are the Thermaltake CT120 EX ARGB Sync Bumblebee fans quiet?
The listed noise figure is 28.5 dB(A), which applies at the fan's maximum. Because the PWM range starts at 500 RPM, you can run them slower for less noise, but the data does not list noise at lower speeds.
Are these fans better for case airflow or radiators?
They list 68 CFM airflow and 2.95 mmH2O static pressure, so they suit both open case ventilation and restricted paths like radiators or mesh filters. The data does not include separate performance tests for each use.
What connectors and size do the CT120 EX ARGB Sync fans need?
Each fan is 120 mm in diameter and 25 mm thick, with a 4-Pin PWM connector for speed control and a 3-Pin ARGB connector for lighting. Your motherboard or controller must provide both header types.















