| Model | CL-F246-PL14SW-A |
|---|---|
| Size | 140 mm |
| Thickness | 28 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 85.2 CFM |
| Max pressure | 2.75 mmH₂O |
| Max noise | 28.1 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 2510-4 Pin + 5V ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
CL-F246-PL14SW-A is a 28 mm thick 140 mm ARGB fan reaching 1800 RPM with 85.2 CFM and 2.75 mmH2O static pressure
More Thermaltake fans · All 140mm models · Browse the full fan database
About the Thermaltake SWAFAN 140 EX INFINITY ARGB Sync 3-Fan Pack
The SWAFAN 140 EX INFINITY ARGB Sync 3-Fan Pack lists 85.2 CFM airflow against 2.75 mmH2O static pressure, so it is balanced rather than one-sided. That airflow figure suits open case ventilation and large radiators, while the pressure number means it can still push through a dense heatsink or filter without the data suggesting a dedicated pressure-only design. The 500 to 1800 RPM range lets you tune speed, and Thermaltake rates noise at 28.1 dB(A), though the data does not state the RPM at which that figure is measured.
At 140 mm diameter and 28 mm thickness, check clearance for the extra depth beyond standard 25 mm fans, especially in tight front or top mounts. The 2510-4 pin PWM connector plus a separate 5V ARGB 3-pin header means your motherboard or controller needs both a fan header and an addressable RGB header. The hydraulic bearing is the only bearing type listed. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the Thermaltake SWAFAN 140 EX INFINITY ARGB Sync 3-Fan Pack quiet?
Thermaltake rates it at 28.1 dB(A), and the 500 RPM minimum lets you run it slowly. The data does not specify the RPM at which the 28.1 dB(A) figure is measured, so treat it as a manufacturer rating rather than a measured result.
What is this fan best for, airflow or static pressure?
It lists 85.2 CFM and 2.75 mmH2O, so it is balanced. The airflow suits case ventilation, and the static pressure figure supports use against filters or denser radiators. The data does not include radiator-specific performance results.
Will the 28 mm thickness and connectors fit my build?
It is 28 mm thick, 3 mm deeper than standard 25 mm fans, so verify clearance in tight mounts. It needs a 2510-4 pin PWM header plus a 5V ARGB 3-pin header, so your board or controller must provide both.
More Thermaltake fans
Other 140mm fans
Thermaltake TOUGHFAN EX 140 ARGB Sync 3-Fan Pack
Cooler Master MasterFan Pro 140 Air Pressure
Thermaltake TOUGHFAN EX 140 ARGB Sync White 3-Fan Pack
Cooler Master MasterFan Pro 140 Air Flow
Thermaltake Riing Quad 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Duo 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack









