| Model | CL-F202-PL12MG-A |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–2000 RPM |
| Max airflow | 57.05 CFM |
| Max pressure | 2.23 mmH₂O |
| Max noise | 25.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Matcha Green |
CL-F202-PL12MG-A is a 25 mm thick 120 mm ARGB fan reaching 2000 RPM with 57.05 CFM and 2.23 mmH2O static pressure
More Thermaltake fans · All 120mm models · Browse the full fan database
About the Thermaltake CT120 ARGB Sync Matcha Green 2-Fan Pack
The CT120 ARGB Sync Matcha Green 2-Fan Pack pairs a 120 mm diameter with a 25 mm thickness, so it fits standard 120 mm case and cooler mounts. Its 500 to 2000 RPM range covers low-speed idle running and higher-speed load use. At 57.05 CFM airflow and 2.23 mmH2O static pressure, the balance suits both open case ventilation and mildly restrictive heatsinks or radiators rather than extreme-pressure scenarios. Thermaltake rates noise at 25.8 dB(A), which is the figure to expect near the top of the range; lower RPM should be quieter, though the data does not list a noise curve.
Each fan uses a 4-Pin PWM connector for speed control plus a separate 3-Pin ARGB header for lighting, so your motherboard needs both. Hydraulic bearings are specified, and the Matcha Green colour is the visual differentiator. The listing does not state a price or release year, so check the retailer for current pricing. Confirm your case or cooler accepts 25 mm thick 120 mm fans and that you have two ARGB headers or a splitter.
Frequently asked questions
Is the Thermaltake CT120 ARGB Sync Matcha Green 2-Fan Pack quiet?
Thermaltake rates it at 25.8 dB(A), measured at an unspecified speed. With a 500 RPM minimum and PWM control, you can run it slower than the 2000 RPM maximum, but the data does not list noise at each speed.
What is the CT120 ARGB Sync Matcha Green 2-Fan Pack best for?
With 57.05 CFM airflow and 2.23 mmH2O static pressure, it suits case ventilation and moderately restrictive heatsinks or radiators. It is a balanced 120 mm fan rather than a dedicated high-pressure model.
Does the CT120 ARGB Sync Matcha Green 2-Fan Pack need special headers?
Yes. Each fan uses a 4-Pin PWM connector for speed control and a 3-Pin ARGB connector for lighting. You need a PWM fan header and an ARGB header per fan, or splitters, plus 120 mm mounting space for 25 mm thickness.















