| Model | CL-F174-PL14SW-A |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 94.95 CFM |
| Max pressure | 2.54 mmH₂O |
| Max noise | 32.8 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-Pin PWM + 3-Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
CL-F174-PL14SW-A is a 25 mm thick 140 mm ARGB fan reaching 1800 RPM with 94.95 CFM and 2.54 mmH2O static pressure
More Thermaltake fans · All 140mm models · Browse the full fan database
About the Thermaltake CT140 Reverse ARGB Sync 2-Fan Pack
The CT140 Reverse ARGB Sync 2-Fan Pack pairs a 140 mm diameter with a 25 mm thickness, so it fits standard 140 mm mounting positions. Its 94.95 CFM airflow figure is high, which suits open case ventilation and low-restriction intake or exhaust paths. Static pressure is listed at 2.54 mmH2O, a moderate figure rather than a radiator-focused one, so buyers pushing through dense fins or filters should weigh that against the airflow number. The 500 to 1800 RPM range gives a wide spread, and the rated 32.8 dB(A) applies at the fan's specified operating point, so expect quieter running toward the low end of that range.
Each fan uses a 4-Pin PWM connector for speed control plus a separate 3-Pin ARGB connector for lighting, so your motherboard or controller needs both headers. The hydraulic bearing is the stated bearing type, and the fans are black with ARGB lighting. The data does not list a price or release year.
Frequently asked questions
Is the Thermaltake CT140 Reverse ARGB Sync 2-Fan Pack quiet?
The rated noise is 32.8 dB(A) at the fan's specified operating point. Because the PWM range starts at 500 RPM and tops out at 1800 RPM, running at lower speeds should be quieter than the rated figure, though the data does not list noise at each speed.
What is the CT140 Reverse ARGB Sync 2-Fan Pack best for?
With 94.95 CFM airflow and 2.54 mmH2O static pressure, it suits case ventilation and low-restriction intake or exhaust positions. The static pressure is moderate rather than high, so the data suggests it is less focused on dense radiator or heavily filtered setups.
What connectors and size does the CT140 Reverse ARGB Sync 2-Fan Pack need?
Each fan is 140 mm in diameter and 25 mm thick, fitting standard 140 mm mounts. It uses a 4-Pin PWM connector for fan speed plus a separate 3-Pin ARGB connector for lighting, so both header types are needed.
More Thermaltake fans
Other 140mm fans
Thermaltake CT140 EX INFINITY ARGB Sync 3-Fan Pack
Thermaltake Riing Quad 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake SWAFAN 140 EX INFINITY ARGB Sync 3-Fan Pack
Thermaltake Riing Duo 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing Plus 14 RGB Radiator Fan TT Premium Edition 3-Fan Pack
Thermaltake Riing 14 RGB Radiator Fan TT Premium Edition









