| Size | 120 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 61.91 CFM |
| Max pressure | 1.83 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
DeepCool FC120 WH is a 120 mm 25 mm fan rated 500-1800 RPM with 61.91 CFM and 1.83 mmH2O at 28 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FC120 WH 120mm ARGB Daisy-Chain Fan White 3-in-1 Pack
The FC120 WH balances airflow and pressure for a 120mm fan. Its 61.91 CFM airflow suits case intake and exhaust where open space lets air move freely, while 1.83 mmH2O static pressure is modest, so it is better suited to unobstructed case mounting than to dense radiators or thick heatsinks. The 500 to 1800 RPM range lets you tune speed to the task, and the 28 dB(A) figure is the manufacturer rating at maximum speed, so expect less noise at lower RPM.
Mounting follows the standard 120mm by 25mm frame, fitting common case and cooler positions. The 4-pin PWM connector supports speed control from the motherboard, and the separate 3-pin ARGB connector drives the lighting, so your board needs both headers or an adapter. The hydraulic bearing is listed for durability, and the white finish suits light-themed builds. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FC120 WH quiet at full speed?
The manufacturer rates it at 28 dB(A), which is the listed figure at its 1800 RPM maximum. Because the fan runs from 500 RPM, you can lower speed through the 4-pin PWM connector for a quieter result.
Is the FC120 WH better for case airflow or radiators?
Its 61.91 CFM airflow is strong for case intake and exhaust, but 1.83 mmH2O static pressure is modest. That makes it a better fit for open case mounting than for dense radiators or thick heatsinks.
What connectors does the FC120 WH need?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin ARGB connector for lighting. Your motherboard needs both a PWM fan header and an ARGB header, or suitable adapters.















