| Size | 120 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–2150 RPM |
| Max airflow | 75 CFM |
| Max pressure | 4.2 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
DeepCool FT12 WH is a 120 mm 25 mm fan rated 500-2150 RPM with 75 CFM and 4.2 mmH2O at 32 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FT12 WH 120mm PWM Fan White 3-in-1 Pack
The DeepCool FT12 WH is a 120 mm, 25 mm thick white PWM fan built around a fluid dynamic bearing. Its 4.2 mmH2O static pressure figure is the standout number: that is high for a 120 mm fan, so it suits heatsinks, radiators and dense mesh front panels where airflow alone struggles. The 75 CFM airflow rating means it can also move a healthy volume of air as a case fan, and the 500 to 2150 RPM range lets you tune between the two jobs.
Noise is rated at 32 dB(A) at the top end, so expect the fan to be audible at full speed and quieter as PWM lowers the RPM. The 4-pin PWM connector requires a header that supports PWM control for speed regulation. Mounting is standard 120 mm spacing at 25 mm thickness, so clearance is typical for the size. There is no lighting, and the data does not list a price or release year.
Frequently asked questions
Is the DeepCool FT12 WH a quiet fan?
DeepCool rates it at 32 dB(A), which is the figure at its maximum 2150 RPM. Because it is PWM controlled and starts at 500 RPM, you can run it slower for less noise, but the data does not list noise levels at lower speeds.
Is the FT12 WH better for a radiator or as a case fan?
Its 4.2 mmH2O static pressure is high for a 120 mm fan, so it is well suited to radiators, heatsinks and restrictive front panels. The 75 CFM airflow also makes it viable as a case fan, depending on how you set the 500 to 2150 RPM range.
Does the DeepCool FT12 WH have RGB lighting and what size is it?
No, the data lists lighting as none, so this is a plain white fan. It is 120 mm in diameter and 25 mm thick, which is standard 120 mm mounting spacing, and it uses a 4-pin PWM connector. Price is not listed in the data.















