| Model | Orbit 120 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 200–2000 RPM |
| Max airflow | 66.72 CFM |
| Max pressure | 2.06 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Orbit 120 ARGB is a 120 mm 28 mm fan rated 200-2000 RPM with 66.72 CFM and 2.06 mmH2O at 31 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Orbit 120 ARGB 120mm ARGB Fan
The Antec Orbit 120 ARGB 120mm is a 28mm-thick 120mm fan running from 200 to 2000 RPM, so it can idle quietly or push hard under load. Its 66.72 CFM airflow and 2.06 mmH2O static pressure sit in a balanced range: it suits case intake and exhaust, and the pressure figure is enough for mildly restrictive filters or mesh, though the data does not list a radiator-specific rating.
Noise is rated at 31 dB(A), which is the figure to expect near the 2000 RPM maximum rather than at low speed, and the fluid dynamic bearing is the type associated with longer service life. The 4-pin PWM connector allows speed control from the motherboard, while the separate 3-pin ARGB header drives the lighting. The 28mm thickness is slightly deeper than standard 25mm fans, so check clearance. Price and release year are not listed in the data.
Frequently asked questions
Is the Antec Orbit 120 ARGB 120mm quiet?
Antec rates it at 31 dB(A), and the fan spans 200 to 2000 RPM. Expect the 31 dB(A) figure near full speed; running it lower via the 4-pin PWM connector should reduce noise, though the data does not list a minimum noise value.
What is the Antec Orbit 120 ARGB best used for?
With 66.72 CFM airflow and 2.06 mmH2O static pressure, it fits case intake and exhaust and light-restriction mounts like mesh or filters. The data does not list a radiator-specific rating, so radiator use is not confirmed by the manufacturer figures.
Will the Antec Orbit 120 ARGB 120mm fit my case?
It is a 120mm fan but 28mm thick rather than the common 25mm, so confirm your case or cooler has that extra depth clearance. It uses a 4-pin PWM connector plus a separate 3-pin ARGB header for the lighting.















