| Model | Infinity Matrix 120 ARGB White |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 46.43 CFM |
| Max pressure | 1.69 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
Antec Infinity Matrix 120 ARGB is a 120 mm 28 mm fan rated 800-1800 RPM with 46.43 CFM and 1.69 mmH2O at 32 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Infinity Matrix 120 ARGB 120mm ARGB Fan White
The Antec Infinity Matrix 120 ARGB 120mm Fan White runs from 800 to 1800 RPM and moves 46.43 CFM at 1.69 mmH2O of static pressure. That balance suits case ventilation and airflow-focused builds better than thick, dense radiators, where higher static pressure usually helps. At the top end Antec rates noise at 32 dB(A), so expect an audible fan at full speed and quieter operation toward the 800 RPM floor.
The 120mm frame is 28mm thick rather than the common 25mm, so check clearance at the mounting point before buying. A 4-pin PWM connector handles speed control, while a separate 3-pin ARGB header drives the lighting, so your motherboard or controller needs both. The hydraulic bearing is the only bearing type listed. Colour is white. The data does not list a price or release year.
Frequently asked questions
Is the Antec Infinity Matrix 120 ARGB 120mm Fan White quiet?
Antec rates it at 32 dB(A) at its 1800 RPM maximum, so it is audible at full speed. It supports PWM control down to 800 RPM, which should reduce noise at lower settings. The data does not include a noise figure for 800 RPM.
Is this fan better for case airflow or for a radiator?
It delivers 46.43 CFM of airflow with 1.69 mmH2O of static pressure, a moderate balance. That makes it a reasonable choice for case ventilation and airflow-focused setups, while very dense radiators typically call for higher static pressure.
Will the 28mm thickness and connectors fit my build?
The frame is 120mm wide and 28mm thick, which is thicker than standard 25mm fans, so verify clearance at your mount. It needs a 4-pin PWM header for speed control and a separate 3-pin ARGB header for lighting.















