| Model | FR-505BR |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 47.2 CFM |
| Max pressure | 1.6 mmH₂O |
| Max noise | 30.0 dBA |
| Connector | PWM 4-Pin + ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
FR-505BR is a 25 mm thick 120 mm fan reaching 1800 RPM with 47.2 CFM and 1.6 mmH2O static pressure
More JONSBO fans · All 120mm models · Browse the full fan database
About the JONSBO FR-505BR ARGB 120mm Reverse Fan (Black)
The JONSBO FR-505BR is a 120mm, 25mm-thick reverse fan rated from 800 to 1800 RPM. Its 47.2 CFM airflow and 1.6 mmH2O static pressure put it in balanced territory: it moves a reasonable volume of air while still pushing through mild resistance, so it suits case intake and exhaust positions where a reverse blade orientation is needed rather than dense radiators or thick filters. At the top end the rated noise is 30.0 dB(A), which is a moderate figure rather than a silent one, so expect it to be audible at full speed and quieter toward the 800 RPM floor.
Mounting is standard 120mm with 25mm thickness, so clearance checks are straightforward. It connects via PWM 4-pin for speed control plus a separate ARGB 3-pin header for lighting, meaning your motherboard needs both. The data does not list a price, release year, bearing type or MTBF, so those details cannot be confirmed here.
Frequently asked questions
Is the JONSBO FR-505BR quiet at full speed?
The manufacturer rates it at 30.0 dB(A), which is a moderate noise level rather than a silent one. It runs from 800 to 1800 RPM, so lowering the PWM speed toward the minimum should reduce noise, though no per-speed noise figures are listed.
What is the JONSBO FR-505BR best used for?
With 47.2 CFM airflow and 1.6 mmH2O static pressure, it is a balanced 120mm reverse fan suited to case airflow positions where reverse blade orientation helps. It is not a high-static-pressure design for dense radiators, based on the listed figures.
Does the FR-505BR need a special header for its ARGB lighting?
Yes. It uses a PWM 4-pin connector for fan speed control and a separate ARGB 3-Pin connector for the lighting, so your motherboard or controller needs both a 4-pin fan header and a 3-pin ARGB header.











