| Model | FR-606B |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 800–1500 RPM |
| Max airflow | 37.33 CFM |
| Max pressure | 1.15 mmH₂O |
| Max noise | 23.5 dBA |
| Connector | PWM 4-Pin + ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
FR-606B is a 25 mm thick 120 mm fan reaching 1500 RPM with 37.33 CFM and 1.15 mmH2O static pressure
More JONSBO fans · All 120mm models · Browse the full fan database
About the JONSBO FR-606B ARGB 120mm Fan (Black)
The JONSBO FR-606B is a 120mm, 25mm-thick black ARGB fan with a PWM 4-pin connector plus a separate ARGB 3-pin header. Its 37.33 CFM airflow and 1.15 mmH2O static pressure sit on the moderate side, so it suits case ventilation and low-to-mid restriction mounts rather than dense radiators or thick dust filters, where higher static pressure helps. Buyers should treat it as an airflow-first fan.
The 800–1500 RPM range and 23.5 dB(A) rating suggest a quiet-leaning profile, though the data does not list test conditions or per-RPM noise. Mounting is standard 120mm with 25mm thickness, so clearance fits most 120mm case and cooler positions; confirm your motherboard has a spare ARGB 3-pin header for lighting. The manufacturer data does not list a price or release year, so check current retail listings for cost.
Frequently asked questions
Is the JONSBO FR-606B ARGB 120mm fan quiet?
JONSBO rates it at 23.5 dB(A) across its 800–1500 RPM range. The data does not list the test conditions or noise at each speed, so treat 23.5 dB(A) as the manufacturer figure rather than a measured guarantee.
What is the JONSBO FR-606B best used for?
With 37.33 CFM airflow and 1.15 mmH2O static pressure, it is best suited to case ventilation and low-restriction 120mm mounts. Dense radiators or thick filters usually benefit from higher static pressure than this fan lists.
Does the JONSBO FR-606B fit a standard 120mm mount and how is it powered?
It is a 120mm fan with 25mm thickness, matching common 120mm case and cooler mounts. Power and control use a PWM 4-pin connector, while lighting uses a separate ARGB 3-pin header, so your board needs both.











