| Model | SL-120B |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1500 RPM |
| Max airflow | 59.48 CFM |
| Max pressure | 1.81 mmH₂O |
| Max noise | 32.0 dBA |
| Bearing | Hydraulic Bearing |
| Connector | PWM 4-Pin + ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
SL-120B is a 25 mm thick 120 mm fan reaching 1500 RPM with 59.48 CFM and 1.81 mmH2O static pressure
More JONSBO fans · All 120mm models · Browse the full fan database
About the JONSBO SL-120B ARGB 120mm Fan (Black)
The JONSBO SL-120B is a 120mm, 25mm-thick case fan that runs from 600 to 1500 RPM. Its 59.48 CFM airflow suits open case ventilation and low-restriction mesh panels, while the 1.81 mmH2O static pressure is modest, so it is a better fit for airflow duty than for pushing through dense radiators or thick dust filters. Buyers should match the fan to the restriction of the mount rather than expect strong pressure performance.
At full speed the rated noise is 32.0 dB(A), so expect audible operation at 1500 RPM and quieter running near the 600 RPM floor. The hydraulic bearing is listed for long-life operation. Connection is a PWM 4-pin for speed control plus a separate ARGB 3-pin for lighting, so your motherboard or controller needs both headers. The 120mm by 25mm frame fits standard 120mm mounts. The data does not list a price or release year.
Frequently asked questions
Is the JONSBO SL-120B ARGB fan quiet at full speed?
The manufacturer rates it at 32.0 dB(A), which is audible at the 1500 RPM maximum. Because it supports PWM from 600 RPM, you can lower the speed for quieter operation, though the data does not list noise at reduced RPM.
Is the SL-120B better for case airflow or radiators?
With 59.48 CFM airflow and 1.81 mmH2O static pressure, it is better suited to case airflow and low-restriction mounts. The modest static pressure makes it a weaker choice for dense radiators or thick filters.
What connectors does the JONSBO SL-120B need?
It uses a PWM 4-pin connector for fan speed control plus a separate ARGB 3-Pin connector for lighting. Your motherboard or fan controller must provide both a 4-pin fan header and a 3-pin ARGB header.















