| Model | AX120 PRO |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 72.3 CFM |
| Max pressure | 1.85 mmH₂O |
| Max noise | 25.4 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
AX120 PRO is a 120 mm 25 mm white fan rated 600-1600 RPM 72.3 CFM and 1.85 mmH2O 25.4 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH AX120 PRO White Fan
The MONTECH AX120 PRO White is a 120mm by 25mm fan with a 600 to 1600 RPM range, rated for 72.3 CFM of airflow and 1.85 mmH2O of static pressure. That balance suits case intake and exhaust as well as lightly restrictive heatsinks and radiators, though buyers pushing through dense fins should weigh the modest static pressure figure. At a maximum 25.4 dB(A), the fan is specified as a quiet option, and the 600 RPM floor gives headroom to run it slower.
Mounting follows standard 120mm spacing at 25mm thickness, so most cases and coolers that take 120mm fans should fit it. The 4-pin PWM connector allows speed control from the motherboard, while the separate 3-pin ARGB header drives the lighting, so your board needs an ARGB header or adapter. The bearing is listed as sleeve bearing. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the MONTECH AX120 PRO White a quiet fan?
Montech rates it at a maximum of 25.4 dB(A) at 1600 RPM, and the 600 RPM minimum lets you run it slower. The data does not include measured noise at lower speeds, so actual quietness depends on your fan curve.
What is the MONTECH AX120 PRO White best for?
With 72.3 CFM airflow and 1.85 mmH2O static pressure, it suits case intake and exhaust and lightly restrictive coolers. Its static pressure is modest, so very dense radiators may favor a higher-pressure fan.
Does the MONTECH AX120 PRO White have RGB and what connector does it need?
Yes, it has ARGB lighting. It uses a 4-pin PWM connector for fan speed plus a separate 3-pin ARGB connector for lighting, so your motherboard or controller needs a compatible ARGB header.















