| Model | MFX-B2DN-18NPA-R1 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 650–1800 RPM |
| Max airflow | 62 CFM |
| Max pressure | 2.5 mmH₂O |
| Max noise | 27 dBA |
| Bearing | Rifle Bearing |
| Connector | 4-Pin PWM |
| Lighting | ARGB |
Cooler Master SickleFlow 120 ARGB delivers 62 CFM at up to 1800 RPM with 27 dBA noise on a 25 mm frame.
More Cooler Master fans · All 120mm models · Browse the full fan database
About the Cooler Master SickleFlow 120 ARGB
The SickleFlow 120 ARGB balances airflow and pressure for a 120mm fan. Its 62 CFM airflow suits case intake and exhaust, while the 2.5 mmH2O static pressure is the figure to weigh for heatsinks, radiators, and mesh or filter-restricted intakes. The 650-1800 RPM range lets you tune between low-speed running and full cooling, and the rated 27 dB(A) gives a noise reference point at the top of that range rather than a measured result in your own build.
Mounting follows the standard 120mm by 25mm format, and the 4-Pin PWM connector means speed control depends on a PWM-capable header on your motherboard or controller. The Rifle Bearing is the stated bearing type, and ARGB lighting requires an ARGB header or compatible controller, which the data does not list as included. Price and release year are not listed in the supplied data, so check the retailer listing for current pricing before ordering.
Frequently asked questions
Is the Cooler Master SickleFlow 120 ARGB quiet?
Cooler Master rates this fan at 27 dB(A) with a 650-1800 RPM range. That figure is the manufacturer's noise rating, so actual noise in your system depends on the speed you run and your case and cooler setup.
What is the SickleFlow 120 ARGB best used for?
With 62 CFM airflow and 2.5 mmH2O static pressure, it suits both case airflow and pressure-restricted spots such as heatsinks, radiators, filters, and mesh front intakes. The 4-Pin PWM connector supports speed control from a PWM header.
Does the SickleFlow 120 ARGB fit a standard 120mm mount?
Yes, it measures 120mm in diameter and 25mm thick, the common 120mm fan size. Confirm clearance for the 25mm thickness and check that your motherboard or controller has a 4-Pin PWM header and an ARGB connection for lighting.















