| Model | SST-AP184i-ARGB |
|---|---|
| Size | 180 mm |
| Thickness | 32 mm |
| Speed range | –1200 RPM |
| Max airflow | 143.21 CFM |
| Max pressure | 2.22 mmH₂O |
| Max noise | 34.5 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-AP184i-ARGB is a 32 mm thick 180 mm ARGB fan reaching 1200 RPM with 143.21 CFM and 2.22 mmH2O static pressure
More SilverStone fans · All 200mm models · Browse the full fan database
About the SilverStone Air Penetrator 184i ARGB
The Air Penetrator 184i ARGB pairs a 180mm diameter with a 32mm thick frame, so it moves a large volume of air at a low 1200 RPM ceiling. Its 143.21 CFM airflow suits open case ventilation and large intake positions, while the 2.22 mmH2O static pressure is modest, so it is better for free-air flow than for pushing through dense radiators or restrictive filters. Buyers should expect the listed 34.5 dB(A) at maximum speed rather than a silent fan.
The dual ball bearing is a durability-focused choice, and the 4-Pin PWM connector lets the board control speed, with a separate 4-1 Pin ARGB header for lighting. At 32mm thick, check clearance behind mounts and drive cages before fitting. The data does not list a price or release year, so confirm those with the retailer. Colour is black.
Frequently asked questions
Is the SilverStone Air Penetrator 184i ARGB quiet?
The manufacturer lists 34.5 dB(A) as its noise figure, which is the maximum-speed rating. The 1200 RPM ceiling and PWM control let you lower speed, but the data does not list noise at reduced RPM, so treat 34.5 dB(A) as the published maximum.
What is the 184i ARGB best used for?
With 143.21 CFM airflow and 2.22 mmH2O static pressure, it suits large case intake and exhaust positions where free airflow matters. The modest static pressure makes it less ideal for dense radiators or highly restrictive filters, based on the listed figures.
Does the 184i ARGB fit my case and motherboard?
It is a 180mm fan with a 32mm thick frame, so confirm your case supports 180mm mounts and has 32mm of clearance. It uses a 4-Pin PWM connector plus a 4-1 Pin ARGB header, so your board needs an ARGB header for lighting.















