| Model | SST-AP183 |
|---|---|
| Size | 180 mm |
| Thickness | 32 mm |
| Speed range | 400–1500 RPM |
| Max airflow | 140.13 CFM |
| Max pressure | 3.17 mmH₂O |
| Max noise | 37 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-Pin PWM |
| Lighting | None |
| Colour | Black |
SST-AP183 is a 32 mm thick 180 mm non-LED fan reaching 1500 RPM with 140.13 CFM and 3.17 mmH2O static pressure
More SilverStone fans · All 200mm models · Browse the full fan database
About the SilverStone Air Penetrator AP183
The Air Penetrator AP183 is a 180mm fan with 32mm thickness, so check your case or cooler clearance before buying, since 180mm mounts are less common than 120mm or 140mm. Its 3.17 mmH2O static pressure suits pressure-resistant situations such as dense heatsinks or restrictive front intakes, while the 140.13 CFM airflow figure shows it can move a large volume of air at its 1500 RPM maximum. The 400 RPM minimum gives a lower-speed option through the 4-pin PWM connector.
Noise is rated at 37 dB(A), which is a fairly high figure and worth planning around if silence matters. The dual ball bearing is a durability-oriented bearing type. Lighting is not included, and the colour is black. The manufacturer data does not list a price or release year, so those cannot be confirmed here. Confirm that your motherboard header and case support a 180mm fan before purchase.
Frequently asked questions
Is the SilverStone Air Penetrator AP183 quiet?
SilverStone rates it at 37 dB(A), which is a relatively high noise figure. The 4-pin PWM control allows speeds from 400 RPM to 1500 RPM, so you can run it lower, but the data does not list noise at reduced speeds.
What is the AP183 best suited for?
With 3.17 mmH2O static pressure and 140.13 CFM airflow, it is positioned for high-pressure, high-airflow use such as restrictive intakes or dense cooling setups. Its 180mm size and 32mm thickness require a compatible mount.
Does the AP183 have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It uses a 4-pin PWM connector for speed control and a dual ball bearing, with no RGB or ARGB illumination specified.















