| Model | SST-SF160B |
|---|---|
| Size | 160 mm |
| Thickness | 27 mm |
| Speed range | –1600 RPM |
| Max airflow | 160 CFM |
| Max pressure | 2.21 mmH₂O |
| Max noise | 38.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM |
| Lighting | None |
| Colour | Black |
SST-SF160B is a 27 mm thick 160 mm non-LED fan reaching 1600 RPM with 160 CFM and 2.21 mmH2O static pressure
More SilverStone fans · All 140mm models · Browse the full fan database
About the SilverStone Shark Force 160
The Shark Force 160 pairs a large 160 mm frame with a 27 mm thickness and a 1600 RPM ceiling, moving up to 160 CFM. That airflow figure suits open, low-restriction mounting where volume matters more than pressure. The 2.21 mmH2O static pressure rating is modest, so for dense radiators or heavily filtered intakes expect it to work harder than a high-pressure design. At full speed SilverStone rates noise at 38.1 dB(A), so plan for audible operation at 1600 RPM and use PWM control to drop speed when you want quiet.
Mounting is a 4-pin PWM connector, so the fan needs a standard PWM header or controller for speed control, and the 160 mm diameter means you should confirm your case or cooler actually accepts 160 mm fans rather than assuming 120 or 140 mm spacing. The bearing is fluid dynamic, and the fan is black with no lighting. The data does not list a price or release year.
Frequently asked questions
Is the SilverStone Shark Force 160 quiet?
SilverStone rates it at 38.1 dB(A) at its 1600 RPM maximum. That is audible at full speed, so use the 4-pin PWM control to run it lower when noise matters more than maximum airflow.
What is the Shark Force 160 best used for?
With 160 CFM airflow but only 2.21 mmH2O static pressure, it suits low-restriction case ventilation where moving air volume matters. Dense radiators or heavily filtered intakes would favor a higher-pressure fan instead.
Does the Shark Force 160 have RGB lighting?
No. The manufacturer data lists no lighting for this fan, and the colour is black. It is a plain black 160 mm fan with a 4-pin PWM connector and a fluid dynamic bearing.















