| Model | SST-SF160B-ARGB |
|---|---|
| Size | 160 mm |
| Thickness | 25 mm |
| Speed range | –1600 RPM |
| Max airflow | 160 CFM |
| Max pressure | 2.21 mmH₂O |
| Max noise | 38.1 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-Pin PWM + 4-1 Pin ARGB |
| Lighting | ARGB |
| Colour | Black |
SST-SF160B-ARGB is a 25 mm thick 160 mm ARGB fan reaching 1600 RPM with 160 CFM and 2.21 mmH2O static pressure
More SilverStone fans · All 140mm models · Browse the full fan database
About the SilverStone Shark Force 160 ARGB
The Shark Force 160 ARGB pairs a 160mm diameter with 25mm thickness and a 1600 RPM ceiling, producing 160 CFM of airflow alongside 2.21 mmH2O of static pressure. That balance suits buyers moving large volumes of air through a spacious case, while the static pressure figure also makes it a reasonable candidate for pushing through a radiator or a dense mesh front where airflow alone would stall. Noise is rated at 38.1 dB(A) at maximum speed, so expect an audible fan at full tilt rather than a near-silent one.
The Fluid Dynamic Bearing is the durability spec SilverStone lists, and the 4-Pin PWM connector allows speed control through the motherboard. ARGB lighting runs on a separate 4-1 Pin ARGB connector, so the fan needs both a PWM header and an ARGB header to light up. The frame is black. The data does not list a price or release year, so check the retailer for current pricing. Confirm your case or cooler accepts a 160mm fan, since this is larger than the common 120mm and 140mm mounts.
Frequently asked questions
Is the SilverStone Shark Force 160 ARGB quiet?
SilverStone rates it at 38.1 dB(A) at its 1600 RPM maximum. That is an audible figure at full speed, so expect noticeable fan noise under load; PWM control lets you run it slower for less noise.
What is the Shark Force 160 ARGB best used for?
With 160 CFM airflow and 2.21 mmH2O static pressure, it suits large case airflow and moderately restrictive setups such as radiators or mesh fronts. The 160mm size means you should confirm your case or cooler supports it.
Does the Shark Force 160 ARGB need two connectors?
Yes. It uses a 4-Pin PWM connector for fan power and speed control, plus a separate 4-1 Pin ARGB connector for the lighting. Your motherboard or controller needs both a PWM header and an ARGB header.















