| Model | TL-C14C-S |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 75.8 CFM |
| Max pressure | 1.93 mmH₂O |
| Max noise | 26.4 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-C14C-S is a value 140 mm model with ARGB lighting rated up to 1500 rpm with 75.8 CFM and 1.93 mmH2O static pressure
More Thermalright fans · All 140mm models · Browse the full fan database
About the TL-C14C-S 140mm ARGB Fan
The TL-C14C-S is a 140mm, 25mm-thick fan rated at 1500 RPM, delivering 75.8 CFM of airflow against 1.93 mmH2O of static pressure. That balance suits both open case ventilation and mildly restrictive filters or mesh, though buyers pushing through dense radiators or tight heatsink fins should note the static pressure figure is modest rather than radiator-focused. Noise is listed at 26.4 dB(A) at maximum speed, so expect a soft, audible hum rather than silence at full tilt, with PWM control letting you dial it down.
Mounting is standard 140mm with 25mm thickness, so check your case or cooler clearance for that footprint. The 4-pin PWM connector handles speed control, while a separate 3-pin 5V ARGB header drives the lighting, so your motherboard needs an ARGB header or adapter. The S-FDB bearing is the stated bearing type. Colour is black. The manufacturer data does not list a price or release year, so confirm current pricing with the retailer.
Frequently asked questions
Is the Thermalright TL-C14C-S 140mm ARGB quiet?
Thermalright rates it at 26.4 dB(A) at its 1500 RPM maximum. That is a moderate noise level, and because it uses 4-pin PWM, you can lower the speed for quieter operation when full airflow is not needed.
What is the TL-C14C-S best used for?
With 75.8 CFM airflow and 1.93 mmH2O static pressure, it suits case intake and exhaust and lightly restricted vents. Its static pressure is modest, so dense radiators or very tight heatsink fins may favor a higher-pressure fan.
Does the TL-C14C-S fit my case and motherboard?
It is a 140mm fan that is 25mm thick, so confirm your case or cooler accepts that size and thickness. It needs one 4-pin PWM header plus a 3-pin 5V ARGB header for the lighting.















