| Model | TL-C14X |
|---|---|
| Size | 140 mm |
| Thickness | 26 mm |
| Speed range | –1800 RPM |
| Max airflow | 92.5 CFM |
| Max pressure | 2.23 mmH₂O |
| Max noise | 30.2 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
TL-C14X is a high speed 140 mm performance model rated up to 1800 rpm with 92.5 CFM and 2.23 mmH2O static pressure
More Thermalright fans · All 140mm models · Browse the full fan database
About the TL-C14X 140mm Non-LED Fan
The TL-C14X is a 140mm fan with 26mm thickness, so it fits most standard 140mm mounts while giving you a larger swept area than a 120mm model. Its 92.5 CFM airflow rating points to strong case ventilation, while the 2.23 mmH2O static pressure figure means it can also push through denser restrictions such as heatsinks or filters. Buyers should weigh both numbers against their setup rather than treating airflow alone as the whole story.
The 1800 RPM ceiling and 30.2 dB(A) rating give you an idea of the noise expectation at full speed, and the 4-pin PWM connector lets a compatible motherboard control that speed. The S-FDB bearing is the listed bearing type, and the fan is black with no lighting. Mounting hardware and price are not listed in the supplied data, so check those details separately before ordering.
Frequently asked questions
Is the Thermalright TL-C14X 140mm Non-LED quiet?
The manufacturer lists a noise rating of 30.2 dB(A) at its 1800 RPM maximum. That is the only noise figure provided, so actual perceived loudness will depend on the speed your PWM controller sets.
Is the TL-C14X better for case airflow or for a heatsink?
It lists 92.5 CFM airflow and 2.23 mmH2O static pressure. The airflow figure suits case ventilation, while the static pressure figure indicates it can also handle restricted paths such as heatsinks or filters.
Does the TL-C14X have RGB lighting and what connector does it use?
No, the data lists lighting as none, and the fan is black. It uses a 4-pin PWM connector, so it needs a compatible PWM header for speed control. Mounting hardware is not listed in the supplied data.















