| Model | TL-M12-S |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 47.6 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 23.2 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-M12-S is a wide frame case fan kit rated up to 1500 rpm with 47.6 CFM and 1.31 mmH2O static pressure at 23.2 dBA
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-M12-S 120mm ARGB Fan
The TL-M12-S balances airflow and pressure for a 120mm fan. Its 47.6 CFM rating at 1500 RPM suits open case airflow and rear exhaust, while 1.31 mmH2O of static pressure is modest, so it is better on low-restriction mounts than dense radiators or thick filters. The 23.2 dB(A) figure suggests a quiet result at full speed, though the data does not list noise at lower PWM duty cycles.
Mounting is standard at 120mm diameter and 25mm thickness, so it fits common case and cooler positions. The 4-pin PWM connector allows speed control from the motherboard, and the separate 3-pin 5V ARGB header drives the lighting. The S-FDB bearing is listed, but the data does not state a rated lifespan, warranty, or price. The black frame keeps the build clean while the ARGB ring adds colour.
Frequently asked questions
Is the Thermalright TL-M12-S 120mm ARGB quiet?
Thermalright rates the TL-M12-S at 23.2 dB(A) at its 1500 RPM maximum. The data does not list noise at lower PWM speeds, so expect quieter operation when the fan is slowed via the 4-pin PWM connector.
What is the TL-M12-S best used for?
With 47.6 CFM and 1.31 mmH2O static pressure, it suits case airflow and exhaust where restriction is low. Its pressure is modest, so dense radiators and thick filters are less ideal according to the listed figures.
Does the TL-M12-S fit a standard 120mm mount and support ARGB?
Yes. It measures 120mm in diameter and 25mm thick, a common fan size. Lighting is ARGB over a 3-pin 5V header, and fan speed uses a separate 4-pin PWM connector, so both motherboard headers are needed.















