| Model | TL-E12B-S V3 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –2000 RPM |
| Max airflow | 72.37 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 27.7 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-E12B-S V3 is a third generation model with ARGB rated up to 2000 rpm with 72.37 CFM and 2.87 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-E12B-S V3 120mm ARGB Fan
The TL-E12B-S V3 balances airflow and pressure for a 120mm fan. Its 72.37 CFM airflow suits open case ventilation, while the 2.87 mmH2O static pressure figure means it can also push through denser obstacles such as heatsink fins or radiator cores. Buyers choosing between the two use cases should weigh which restriction their build actually has.
At a maximum 2000 RPM the rated noise is 27.7 dB(A), so expect the loudest point at full speed and quieter operation when PWM lowers the RPM. The 25mm thickness fits standard 120mm mounts. A 4-pin PWM header handles speed control, and the separate 3-pin 5V ARGB connector needs an ARGB header on the motherboard or controller. The S-FDB bearing is listed; the data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-E12B-S V3 quiet?
Thermalright rates it at 27.7 dB(A) at its maximum 2000 RPM. Because it uses 4-pin PWM, the fan can run slower and quieter under motherboard control, but the data does not list noise levels at lower speeds.
Is this fan better for a case or a radiator?
It lists 72.37 CFM airflow and 2.87 mmH2O static pressure, so it can serve either role. The pressure rating helps against restricted paths like radiator fins, while the airflow figure suits open case ventilation. Your build's restriction decides the fit.
What connectors does the TL-E12B-S V3 need?
It uses a 4-pin PWM connector for fan power and speed control, plus a separate 3-pin 5V ARGB connector for lighting. Your motherboard or controller needs a 5V ARGB header for the lighting to work.















