| Model | TL-M12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 47.6 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 23.2 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-M12 is a wide frame case fan with ARGB rated up to 1500 rpm with 47.6 CFM and 1.31 mmH2O static pressure at 23.2 dBA
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-M12 120mm ARGB Fan
The TL-M12 is a 120mm by 25mm ARGB fan rated at 1500 RPM, 47.6 CFM and 1.31 mmH2O static pressure. That balance suits case exhaust and intake positions where open airflow matters more than pushing through dense radiators or thick dust filters. Buyers running a high-restriction heatsink or a tightly finned radiator should note the modest 1.31 mmH2O figure rather than expecting a pressure-optimised unit.
Thermalright rates noise at 23.2 dB(A), so expect a quiet result at lower PWM duty, with the full 1500 RPM ceiling being the loudest point. The S-FDB bearing is the listed bearing type. Mounting is standard 120mm with 25mm thickness, and the fan uses a 4-pin PWM connector plus a separate 3-pin 5V ARGB header, so your board needs an ARGB header for lighting. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-M12 120mm ARGB quiet?
Thermalright rates it at 23.2 dB(A) at up to 1500 RPM. That is the manufacturer noise figure, so expect the quietest operation at reduced PWM duty and the highest noise near full speed.
What is the TL-M12 best used for?
With 47.6 CFM and 1.31 mmH2O, it suits case intake and exhaust airflow. Its static pressure is modest, so dense radiators or heavy filters may favour a pressure-focused fan instead.
Does the TL-M12 need a special RGB header?
Yes. It uses a 4-pin PWM connector for fan control plus a separate 3-pin 5V ARGB connector for lighting, so your motherboard or controller needs a 5V ARGB header.















