| Model | TL-S12 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 47.6 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 23.2 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-S12 is a quiet ARGB case fan rated up to 1500 rpm with 47.6 CFM and 1.31 mmH2O static pressure at 23.2 dBA
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-S12 120mm ARGB Fan
The TL-S12 120mm ARGB runs up to 1500 RPM and moves 47.6 CFM at 1.31 mmH2O of static pressure. That balance suits case ventilation and light heatsink or radiator duty, though buyers pushing through dense fins or thick radiators should note the modest pressure figure. Thermalright rates noise at 23.2 dB(A), so expect a quiet result at lower PWM speeds, with the full 1500 RPM figure representing the ceiling rather than typical running noise.
Mounting follows the standard 120mm by 25mm format, so it fits common case and cooler positions. The 4-pin PWM connector handles speed control, while a separate 3-pin 5V ARGB header drives the lighting, meaning your motherboard needs an ARGB header or controller. The S-FDB bearing is listed for long-term use. Colour is black. The data does not list a price or release year, so confirm current pricing with the retailer.
Frequently asked questions
Is the Thermalright TL-S12 120mm ARGB quiet?
Thermalright rates it at 23.2 dB(A) at up to 1500 RPM. That is a low figure on paper, and PWM control lets you run it slower for less noise, though actual sound depends on your setup.
What is the TL-S12 best used for?
With 47.6 CFM and 1.31 mmH2O, it suits case airflow and light cooler or radiator use. Its modest static pressure makes it less ideal for dense fins or thick radiators where higher pressure fans help.
Does the TL-S12 120mm ARGB need a special header?
Yes. It uses a 4-pin PWM connector for fan speed plus a separate 3-pin 5V ARGB connector for lighting. Your motherboard or controller must have a 5V ARGB header for the LEDs to work.















