| Model | TL-M12R |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | –1500 RPM |
| Max airflow | 42.6 CFM |
| Max pressure | 1.31 mmH₂O |
| Max noise | 23.2 dBA |
| Bearing | S-FDB Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-M12R is a wide frame reverse blade model rated up to 1500 rpm with 42.6 CFM and 1.31 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-M12R 120mm ARGB Fan
The TL-M12R is a 120mm by 25mm fan rated at 1500 RPM, which puts it in moderate-speed territory rather than high-static-pressure territory. Its 42.6 CFM airflow is the stronger figure next to 1.31 mmH2O static pressure, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. Buyers pushing air through a heatsink stack should weigh that pressure number carefully.
At 23.2 dB(A) the fan is specified for quiet-leaning builds, though the data does not list a minimum starting voltage or a zero-RPM mode. Mounting is standard 120mm with 25mm thickness, and the S-FDB bearing is the stated bearing type. The 4-pin PWM connector handles speed control while a separate 3-pin 5V ARGB header drives the lighting, so your board needs both. Colour is black. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-M12R 120mm ARGB quiet?
Thermalright rates the TL-M12R at 23.2 dB(A) at its 1500 RPM maximum, and it uses an S-FDB bearing. The data does not list a minimum RPM or zero-RPM mode, so lower-speed noise figures are not specified.
Is the TL-M12R better for case airflow or for a radiator?
The data lists 42.6 CFM airflow against 1.31 mmH2O static pressure, so the airflow figure is the stronger of the two. That points to open case ventilation and low-restriction grilles rather than dense radiators or thick filters.
What connectors does the TL-M12R need for PWM and ARGB?
It uses a 4-pin PWM connector for fan speed control plus a separate 3-pin 5V ARGB connector for the lighting. Your motherboard or controller needs both a PWM fan header and a 5V ARGB header for full function.















