| Model | MFY-F4NN-08NMK-R1 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 650–1600 RPM |
| Max airflow | 106 CFM |
| Max pressure | 2.1 mmH₂O |
| Max noise | 36 dBA |
| Connector | 4-Pin PWM |
| Lighting | None |
Cooler Master MasterFan Pro 140 Air Flow delivers 106 CFM at up to 1600 RPM with 36 dBA noise on a 25 mm frame.
More Cooler Master fans · All 140mm models · Browse the full fan database
About the Cooler Master MasterFan Pro 140 Air Flow
The MasterFan Pro 140 Air Flow is a 140mm, 25mm-thick case fan built around high airflow rather than pressure. Its 106 CFM rating at up to 1600 RPM suits open case panels, mesh intakes and exhaust positions where air moves freely. The 2.1 mmH2O static pressure figure is modest, so dense radiators and heavily restricted filters are not its natural home. Buyers should expect noise to scale with speed: the listed 36 dB(A) is the top-end figure, while the 650 RPM minimum gives a slower, quieter option through PWM control.
Mounting follows standard 140mm spacing at 25mm thickness, and the 4-Pin PWM connector lets a motherboard control speed across the 650–1600 RPM range. There is no lighting, so it suits builds that avoid RGB. The manufacturer data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the Cooler Master MasterFan Pro 140 Air Flow quiet?
The data lists 36 dB(A) as the noise figure, which corresponds to its 1600 RPM maximum. Because it is PWM controlled down to 650 RPM, you can run it slower for less noise, though the data does not give a dB(A) value for lower speeds.
Is this fan best for a radiator or for case airflow?
It is aimed at airflow. The 106 CFM rating is high, but static pressure is only 2.1 mmH2O, so it suits open case intakes and exhausts better than dense radiators or heavily restricted filters where higher pressure is needed.
Does the MasterFan Pro 140 Air Flow have RGB lighting?
No. The manufacturer data lists lighting as none, so this is a non-illuminated fan. It uses a 4-Pin PWM connector for speed control and measures 140mm in diameter with 25mm thickness, fitting standard 140mm case mounts.











