| Model | Mobius 140 Black Edition |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 0–1900 RPM |
| Max airflow | 76.5 CFM |
| Max pressure | 2.3 mmH₂O |
| Max noise | 30 dBA |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
140 mm all black quiet fan with 1900 RPM and pressure focused blades for modern cases
More Cooler Master fans · All 140mm models · Browse the full fan database
About the Cooler Master Mobius 140 Black Edition
The Mobius 140 Black Edition is a 140mm, 25mm-thick fan rated from 0 to 1900 RPM on a 4-pin PWM header, so it can stop entirely at low load and ramp up when cooling demand rises. Its 76.5 CFM airflow and 2.3 mmH2O static pressure sit in a balanced range: the airflow figure suits open case ventilation and rear or top exhaust, while the static pressure is modest enough that dense radiators and thick dust filters will ask more of it than a high-pressure specialist.
Cooler Master rates noise at 30 dB(A), which is the figure to expect near the top of the speed range rather than at idle. There is no lighting and the frame is black, so it suits builds without RGB. The 140mm size and 25mm thickness fit standard 140mm mounts, and the 4-pin PWM connector needs a PWM-capable header or controller. The data does not list a price or release year.
Frequently asked questions
Is the Cooler Master Mobius 140 Black Edition quiet?
Cooler Master rates it at 30 dB(A). Because the fan runs from 0 to 1900 RPM via 4-pin PWM, you can set a lower curve for quieter operation; the data does not list noise at specific speeds.
Is the Mobius 140 Black Edition best for case airflow or radiators?
It lists 76.5 CFM airflow and 2.3 mmH2O static pressure. That balance favors case intake and exhaust, while high-density radiators and restrictive filters typically benefit from higher static pressure than this figure.
Does the Mobius 140 Black Edition have RGB, and what size mount does it need?
No, lighting is listed as none and the colour is black. It is a 140mm fan with 25mm thickness, so it fits standard 140mm fan mounts and connects through a 4-pin PWM header.











