| Model | D30-140 |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | 250–1800 RPM |
| Max airflow | 71.93 CFM |
| Max pressure | 3.32 mmH₂O |
| Max noise | 29.5 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM, 5V |
| Lighting | ARGB |
| Colour | Black |
140 mm D30 with a 30 mm frame and 30 integrated D-RGB LEDs for premium showcase builds
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks D30-140
The Phanteks D30-140 pairs a 140mm diameter with a thicker 30mm frame, which gives it room for a 71.93 CFM airflow rating and 3.32 mmH2O of static pressure. That combination suits buyers who need to push air through radiators, mesh or dense filters as well as open case ventilation, since the static pressure figure is the more useful number when resistance is in the way. The 250 to 1800 RPM range lets you run it slow for everyday use or ramp it up under load.
Noise is rated at 29.5 dB(A), so expect the fan to be audible near its 1800 RPM ceiling and quieter toward the 250 RPM floor; the data does not list a specific noise figure for lower speeds. It uses a Fluid Dynamic Bearing, a 4-pin PWM connector plus 5V for the ARGB lighting, and comes in black. The listing does not state a price or release year, so check the retailer for current pricing and confirm your case or radiator has clearance for a 30mm-thick 140mm fan.
Frequently asked questions
Is the Phanteks D30-140 quiet at full speed?
Phanteks rates the D30-140 at 29.5 dB(A), with a 250 to 1800 RPM range. The data does not give noise figures for individual speeds, so expect the full 1800 RPM to be the loudest point and lower RPM to be quieter.
Is the D30-140 better for radiators or case airflow?
It offers 3.32 mmH2O static pressure and 71.93 CFM airflow. The static pressure figure makes it a reasonable candidate for radiators, heatsinks and filtered intakes, while the airflow rating also supports general case ventilation in a 140mm mount.
What connector and lighting does the D30-140 use?
The fan uses a 4-pin PWM connector for speed control and a 5V connection for its ARGB lighting, with a Fluid Dynamic Bearing. It is 140mm wide and 30mm thick, so confirm your case or radiator has clearance for the extra thickness.















