| Model | M25G2-140 |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 350–1800 RPM |
| Max airflow | 101.78 CFM |
| Max pressure | 2.23 mmH₂O |
| Max noise | 36.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
140 mm airflow oriented fan delivering 101 CFM at a low 2.23 mmH2O for open case intake
More Phanteks fans · All 140mm models · Browse the full fan database
About the Phanteks M25G2-140
The Phanteks M25G2-140 is a 140mm, 25mm-thick PWM fan built around a hydraulic bearing and a 4-pin connector. Its 101.78 CFM airflow is high for the size, which suits open case ventilation and low-restriction mesh or filter setups. Static pressure is listed at 2.23 mmH2O, a moderate figure that can handle mild obstruction such as a radiator or dense front filter, though the airflow number is the headline. The 350–1800 RPM range lets you tune speed to the workload.
Noise is rated up to 36.4 dB(A) at the top end, so expect audible airflow at full 1800 RPM and quieter operation when the PWM curve is dialled down. The fan is black with no lighting, so it will not add RGB to a build. Mounting is standard 140mm with 25mm thickness, and the 4-pin PWM connector needs a motherboard header or controller. The data does not list a price or release year.
Frequently asked questions
Is the Phanteks M25G2-140 quiet?
Phanteks rates it at up to 36.4 dB(A), which is the maximum at 1800 RPM. Because it is PWM-controlled from 350 RPM, you can lower the speed for quieter running, but the data does not give noise figures for lower speeds.
Is the M25G2-140 better for airflow or radiators?
Its 101.78 CFM airflow is the stronger number, so it suits case ventilation and low-restriction intakes. The 2.23 mmH2O static pressure is moderate and can push through mild restriction, but the data does not claim radiator-optimised performance.
Does the Phanteks M25G2-140 have RGB lighting?
No. The manufacturer lists lighting as None, and the fan colour is black. It is a plain 140mm fan with a 4-pin PWM connector and hydraulic bearing, so any lighting in your build must come from other components.















