| Model | STORM T3 140 |
|---|---|
| Size | 140 mm |
| Thickness | 30 mm |
| Speed range | 600–1500 RPM |
| Max airflow | 112.72 CFM |
| Max pressure | 2.29 mmH₂O |
| Max noise | 33.69 dBA |
| Bearing | Fluid Dynamic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
30 mm thick 140 mm fan with a 1500 RPM ceiling for high airflow case and radiator duty
More Antec fans · All 140mm models · Browse the full fan database
About the Antec STORM T3 140
The Antec STORM T3 140 is a 140mm fan with a 30mm thick frame, which gives it more room for blade sweep than a standard slim fan. Its 112.72 CFM airflow figure points to strong open-air movement, while 2.29 mmH2O static pressure means it can also push through a radiator or dense mesh without being purely a case-ventilation fan. Buyers should treat it as a flexible option rather than a pressure-only or airflow-only design.
Noise is rated at 33.69 dB(A) at the top end, so expect audible airflow at 1500 RPM and quieter running near the 600 RPM minimum. The 4-pin PWM connector allows speed control from a motherboard header, and the Fluid Dynamic Bearing is the stated bearing type. It is a black, non-lit fan, so it suits builds without RGB. The data does not list a price or release year.
Frequently asked questions
Is the Antec STORM T3 140 quiet?
Antec rates it at 33.69 dB(A), which is the fan's listed noise figure. With a 600 RPM minimum and 1500 RPM maximum on 4-pin PWM, you can run it slower for less noise, but the data does not give noise levels at specific speeds.
Is the STORM T3 140 good for radiators or case airflow?
It lists 112.72 CFM airflow and 2.29 mmH2O static pressure, so it has both strong open-airflow and moderate pressure capability. That makes it usable for case ventilation and for pushing through radiators or mesh, though the data does not include radiator-specific test results.
Does the Antec STORM T3 140 have RGB, and what size is it?
No, lighting is listed as none and the colour is black. It is a 140mm fan that is 30mm thick rather than the common 25mm, so check clearance in your case or cooler before mounting. It uses a 4-pin PWM connector.














