| Size | 120 mm |
|---|---|
| Thickness | 25 mm |
| Speed range | 500–1800 RPM |
| Max airflow | 61.91 CFM |
| Max pressure | 1.83 mmH₂O |
| Max noise | 28 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
DeepCool FC120 is a 120 mm 25 mm fan rated 500-1800 RPM with 61.91 CFM and 1.83 mmH2O at 28 dBA
More DeepCool fans · All 120mm models · Browse the full fan database
About the DeepCool FC120 120mm ARGB Daisy-Chain Fan 3-in-1 Pack
The DeepCool FC120 is a 120mm by 25mm fan with a 500 to 1800 RPM range, so it can idle quietly or ramp up when load rises. Its 61.91 CFM airflow suits open case ventilation and rear or top exhaust, while the 1.83 mmH2O static pressure is modest, so buyers mounting it on dense radiators or thick dust filters should expect it to move air rather than push hard through restriction.
DeepCool rates noise at 28 dB(A), which is the figure to compare against your own tolerance rather than a promise of silence at full speed. The hydraulic bearing is listed for longer-life operation, and the 4-pin PWM plus 3-pin ARGB connectors mean the fan needs both a PWM header and an ARGB header, so check your board before buying. The data does not list a price or release year.
Frequently asked questions
Is the DeepCool FC120 quiet at full speed?
DeepCool lists 28 dB(A) as the noise figure, and the fan can drop to 500 RPM for lower-noise running. The data does not give noise at each speed, so treat 28 dB(A) as the rated maximum.
What is the DeepCool FC120 best used for?
With 61.91 CFM airflow and 1.83 mmH2O static pressure, it suits case intake and exhaust where open airflow matters. Its static pressure is modest, so dense radiators and restrictive filters are not its strongest use.
What connectors does the FC120 need?
It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller must provide both headers, so confirm ARGB support before purchase.















