| Model | Infinity Matrix 120 ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 28 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 46.43 CFM |
| Max pressure | 1.69 mmH₂O |
| Max noise | 32 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
Antec Infinity Matrix 120 ARGB is a 120 mm 28 mm fan rated 800-1800 RPM with 46.43 CFM and 1.69 mmH2O at 32 dBA
More Antec fans · All 120mm models · Browse the full fan database
About the Antec Infinity Matrix 120 ARGB 120mm ARGB Fan
The Antec Infinity Matrix 120 ARGB 120mm is a 120mm fan with a 28mm frame, so check clearance in tight builds where a standard 25mm fan barely fits. Its 800–1800 RPM range and 46.43 CFM airflow suit case ventilation and open-airflow positions, while the 1.69 mmH2O static pressure is modest, so it is a better fit for low-restriction mounts than for dense radiators or thick dust filters. At full speed Antec rates noise at 32 dB(A), so expect audible operation at 1800 RPM and quieter running near the 800 RPM floor.
The hydraulic bearing is listed without a rated lifespan, and the data does not list a price or release year. A 4-pin PWM connector handles speed control from the motherboard, and the separate 3-pin ARGB connector drives the lighting, so your board or controller needs both headers. The black frame and ARGB lighting are the only colour and lighting details given. Mounting screws and accessories are not listed in the data.
Frequently asked questions
Is the Antec Infinity Matrix 120 ARGB 120mm quiet?
Antec rates it at 32 dB(A) at its 1800 RPM maximum. Because it can drop to 800 RPM, you can lower speed through the 4-pin PWM connector for quieter running, but the data does not list noise at lower speeds.
Is this fan better for case airflow or for a radiator?
Its 46.43 CFM airflow is the stronger figure, while 1.69 mmH2O static pressure is modest. That makes it a reasonable choice for case ventilation and low-restriction mounts, but the data does not position it for dense radiators.
What connectors and size does it need?
It uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so your motherboard or controller needs both. The fan is 120mm wide and 28mm thick, so confirm your case or cooler clears the extra thickness.















