| Model | AM-120-SLIM |
|---|---|
| Size | 120 mm |
| Thickness | 15 mm |
| Speed range | –2500 RPM |
| Max airflow | 59.6 CFM |
| Max pressure | 2.7 mmH₂O |
| Max noise | 31 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
AM-120-SLIM is a 120 mm 15 mm black fan rated 2500 RPM 59.6 CFM and 2.7 mmH2O 31 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING AM-120-SLIM Fan
The ID-COOLING AM-120-SLIM is a 120mm fan just 15mm thick, so it suits tight builds where a standard 25mm fan will not clear a heatsink, radiator or side panel. Its 2500 RPM ceiling produces 59.6 CFM of airflow and 2.7 mmH2O of static pressure, a balance that works for both case exhaust and pressure-resistant spots such as dense fins or radiators. Buyers should weigh that against the rated 31 dB(A), which is a high-speed figure rather than a quiet idle number.
A 4-pin PWM connector lets a motherboard control speed, and the hydraulic bearing is the stated bearing type. The frame is black with no lighting. Mounting hardware and release year are not listed in the data, so confirm screw fitment for 15mm-deep mounting before ordering. Price is also not listed, so compare current listings yourself.
Frequently asked questions
Is the ID-COOLING AM-120-SLIM quiet?
The data lists 31 dB(A) at its 2500 RPM maximum. That is the rated full-speed noise figure, and no lower-speed noise values are published. PWM control may allow lower speeds, but the manufacturer data does not state noise at reduced RPM.
What is the AM-120-SLIM best used for?
With 59.6 CFM airflow and 2.7 mmH2O static pressure, it suits both case airflow and pressure-restricted spots like dense heatsinks or radiators. Its 15mm thickness helps in tight clearances where a standard 25mm fan will not fit.
Does the AM-120-SLIM have RGB lighting?
No. The manufacturer data lists lighting as none, and the colour as black. It is a plain black 120mm fan with a 4-pin PWM connector and a hydraulic bearing, so there is no illuminated frame or LED hub to configure.















