| Model | XF-12025-SD-K |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 900–1800 RPM |
| Max airflow | 74.5 CFM |
| Max noise | 35.2 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
XF-12025-SD-K is a 120 mm 25 mm black fan rated 900-1800 RPM 74.5 CFM and 35.2 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING XF-12025-SD-K Fan
The ID-COOLING XF-12025-SD-K is a 120mm fan with a 25mm frame, so it fits standard 120mm case and cooler mounting points. Its 900–1800 RPM range is controlled through a 4-pin PWM connector, letting the motherboard ramp speed with load instead of running flat out. At the top end it moves 74.5 CFM, which points to airflow duty such as case intake or exhaust rather than tight, high-impedance heatsinks where static pressure matters more. The manufacturer rates noise at 35.2 dB(A), so expect audible movement at full speed and quieter running toward the 900 RPM floor.
The hydraulic bearing is the only bearing type listed, and the data does not state a rated lifespan or MTBF figure. There is no lighting, and the colour is black, so it suits builds without RGB. The data does not list a price or release year, so check the retailer for current pricing. Buyers should confirm clearance for the 25mm thickness and that a 4-pin PWM header is free.
Frequently asked questions
Is the ID-COOLING XF-12025-SD-K quiet?
The manufacturer rates it at 35.2 dB(A), with a minimum speed of 900 RPM and a maximum of 1800 RPM. PWM control lets it run slower and quieter at low load, but the data does not include measured noise at specific speeds.
Is this fan best for case airflow or a CPU cooler?
It delivers 74.5 CFM at up to 1800 RPM, which suits case intake and exhaust airflow. The data does not list a static pressure figure, so it cannot be confirmed as a high-impedance radiator or dense heatsink fan.
Does the XF-12025-SD-K have RGB lighting?
No. The manufacturer lists lighting as none, and the fan colour is black. It uses a 4-pin PWM connector for speed control, and the 120mm diameter with 25mm thickness fits standard 120mm mounting points.















