| Model | XF-12025-ARGB Trio Snow |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 700–1500 RPM |
| Max airflow | 62 CFM |
| Max pressure | 1.78 mmH₂O |
| Max noise | 26.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
XF-12025-ARGB Trio Snow is a 120 mm 25 mm white fan rated 700-1500 RPM 62 CFM and 1.78 mmH2O 26.4 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING XF-12025-ARGB Trio Snow 3-Pack White Fan
The XF-12025-ARGB Trio Snow 3-Pack White uses 120mm by 25mm fans running from 700 to 1500 RPM. Its 62 CFM airflow is the headline figure, while 1.78 mmH2O static pressure is modest, so these fans suit open case airflow and low-restriction mesh intakes better than dense radiators or thick dust filters. Buyers pushing through heavy restriction should expect the pressure number to matter more than the airflow number.
At 26.4 dB(A) maximum, noise should stay moderate at full speed, and the 700 RPM floor gives a quieter low setting. The 4-pin PWM connector allows speed control from the motherboard, and the separate 3-pin ARGB connector handles lighting, so the board needs both a PWM header and an ARGB header. The white finish and ARGB lighting suit light-themed builds. The data does not list a price or release year.
Frequently asked questions
Are the ID-COOLING XF-12025-ARGB Trio Snow fans quiet?
The rated noise is 26.4 dB(A) at the 1500 RPM maximum, and the fans can run as low as 700 RPM via 4-pin PWM control, so lower speeds should be quieter. The data does not list noise at intermediate speeds.
What are these fans best used for?
With 62 CFM airflow and 1.78 mmH2O static pressure, they suit case airflow and low-restriction mesh intakes. The modest static pressure makes them less ideal for dense radiators or thick filters, where higher-pressure fans are usually preferred.
Do the fans need a special motherboard header for ARGB?
Yes. Each fan uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector for lighting, so the motherboard needs both a PWM fan header and an ARGB header. The data does not list an included controller.















