| Model | XF-12025-SW |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 700–1800 RPM |
| Max airflow | 74.5 CFM |
| Max pressure | 2.15 mmH₂O |
| Max noise | 35 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | White |
XF-12025-SW is a 120 mm 25 mm white fan rated 700-1800 RPM 74.5 CFM and 2.15 mmH2O 35 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING XF-12025-SW White Fan
The ID-COOLING XF-12025-SW White is a 120mm fan with 25mm thickness, so it fits standard 120mm case and cooler mounts. Its 74.5 CFM airflow and 2.15 mmH2O static pressure make it a balanced choice: the airflow figure suits open case ventilation and rear or top exhaust, while the static pressure is enough for pushing through a radiator or dense heatsink without being a dedicated high-pressure design. The 700–1800 RPM range lets you run it slow for everyday use or ramp up under load via the 4-pin PWM connector.
Noise is rated at 35 dB(A), which is the manufacturer's figure at its highest operating point, so expect less at lower RPM. The hydraulic bearing is listed as the bearing type. Lighting is listed as none, and the colour is white, so it suits a clean white build without RGB. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the ID-COOLING XF-12025-SW White a quiet fan?
The manufacturer rates it at 35 dB(A), which is the listed noise figure at its maximum 1800 RPM. Because it runs from 700 RPM via 4-pin PWM, you can lower the speed for less noise, though the data does not list noise at reduced RPM.
What is the XF-12025-SW White best used for?
With 74.5 CFM airflow and 2.15 mmH2O static pressure, it suits both case ventilation and moderate restriction such as a radiator or dense heatsink. It is a balanced 120mm fan rather than a dedicated high-static-pressure model.
Does the XF-12025-SW White have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is white. It connects with a 4-pin PWM connector and uses a hydraulic bearing, so it is aimed at builds without addressable RGB.















