| Model | XF-12025-ARGB Trio |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 700–1500 RPM |
| Max airflow | 62 CFM |
| Max pressure | 1.78 mmH₂O |
| Max noise | 26.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
XF-12025-ARGB Trio is a 120 mm 25 mm black fan rated 700-1500 RPM 62 CFM and 1.78 mmH2O 26.4 dBA
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING XF-12025-ARGB Trio 3-Pack Fan
The XF-12025-ARGB Trio gives you three 120mm by 25mm fans, each running from 700 to 1500 RPM through a 4-pin PWM connector. At 62 CFM airflow against 1.78 mmH2O static pressure, the balance leans toward open case ventilation and low-resistance mesh or filter setups rather than dense radiators, where higher pressure fans usually suit better. The 26.4 dB(A) rating is the manufacturer figure at its stated condition, so expect a modest hum rather than silence at full speed, with PWM letting you drop toward 700 RPM for quieter running.
Mounting is standard 120mm spacing at 25mm thickness, so most cases and many coolers accept them, though the data does not list screw length or radiator compatibility. Each fan uses a 4-pin PWM header plus a separate 3-pin ARGB connector, so your motherboard or controller needs both PWM fan headers and a 5V ARGB header for lighting. Hydraulic bearings are listed for longevity. The data does not list a price, release year, warranty or included controller, so confirm those with the retailer before buying.
Frequently asked questions
Are the ID-COOLING XF-12025-ARGB Trio fans quiet?
The manufacturer rates them at 26.4 dB(A), with a 700 RPM minimum and 1500 RPM maximum. PWM control lets you run them slower for less noise, but the data does not state the exact test conditions behind that figure.
Are these fans better for case airflow or radiators?
With 62 CFM airflow and 1.78 mmH2O static pressure, they suit case intake and exhaust and low-resistance filters. Dense radiators typically favor higher static pressure, and the data does not list radiator compatibility or performance.
What connectors and motherboard headers do I need?
Each fan uses a 4-pin PWM connector for speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs matching PWM fan headers and a 5V ARGB header; the data does not list an included controller or adapter.















