| Model | XF-12025-ARGB |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 700–1500 RPM |
| Max airflow | 62 CFM |
| Max pressure | 1.78 mmH₂O |
| Max noise | 26.4 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
XF-12025-ARGB is a 120 mm 25 mm black fan rated 700-1500 RPM 62 CFM and 1.78 mmH2O 26.4 dBA with ARGB lighting
More ID-COOLING fans · All 120mm models · Browse the full fan database
About the ID-COOLING XF-12025-ARGB Fan
The XF-12025-ARGB runs from 700 to 1500 RPM, delivering 62 CFM of airflow against 1.78 mmH2O of static pressure. That balance suits buyers who want a general-purpose 120mm fan for case ventilation or light restriction rather than a pressure-optimised radiator fan, since the static pressure figure is modest. At its 26.4 dB(A) rating the fan is specified for a moderate noise level, and the 700 RPM floor gives headroom for quieter running when PWM control lowers the speed.
Mounting follows the standard 120mm by 25mm format, so it fits common 120mm case and cooler positions. The hydraulic bearing is listed for reduced wear, and the 4-pin PWM connector handles speed control while the separate 3-pin ARGB connector drives the lighting, so your motherboard needs an ARGB header. Colour is black. The manufacturer data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the ID-COOLING XF-12025-ARGB quiet?
The manufacturer rates it at 26.4 dB(A) at up to 1500 RPM. Its 700 RPM minimum means PWM control can run it slower and quieter. Actual noise in your system is not listed in the data.
What is the XF-12025-ARGB best used for?
With 62 CFM airflow and 1.78 mmH2O static pressure, it suits general 120mm case ventilation and low-restriction mounting. The modest static pressure figure means it is not a dedicated high-pressure radiator fan.
Does the XF-12025-ARGB need a special motherboard header?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin ARGB connector for lighting. Your motherboard needs an ARGB header for the lighting to work. The data does not list a price.















