| Model | RX120 PRO |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 72.3 CFM |
| Max pressure | 1.85 mmH₂O |
| Max noise | 27.8 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
RX120 PRO is a 120 mm 25 mm white fan rated 600-1600 RPM 72.3 CFM and 1.85 mmH2O 27.8 dBA with ARGB lighting
More Montech fans · All 120mm models · Browse the full fan database
About the MONTECH RX120 PRO White Fan
The MONTECH RX120 PRO White is a 120mm, 25mm-thick fan built for buyers who want addressable RGB lighting without giving up airflow. Its 72.3 CFM rating at up to 1600 RPM points to a case-ventilation role, where moving large volumes of air matters more than pushing through dense radiators or filters. The 1.85 mmH2O static pressure figure is modest, so it is a better fit for open mesh intakes and exhaust positions than for thick, high-fin-density cooling hardware.
Noise is rated at 27.8 dB(A) at maximum speed, and the 600 RPM floor lets the fan idle down for quieter running when the 4-pin PWM header calls for it. The Sleeve Bearing is a simple, low-cost bearing type. Mounting uses standard 120mm 25mm spacing, and the 3-pin ARGB connector needs a compatible header or controller. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the MONTECH RX120 PRO White quiet?
Montech rates it at 27.8 dB(A) at its 1600 RPM maximum. The 600 RPM minimum means PWM control can drop it to lower speeds for quieter operation, though the data does not list noise at reduced RPM.
What is the RX120 PRO White best used for?
With 72.3 CFM airflow and 1.85 mmH2O static pressure, it suits case intake and exhaust positions. The modest pressure figure makes it less ideal for thick radiators or dense filters than a high-static-pressure fan.
Does the RX120 PRO White fit a standard 120mm mount?
Yes. It is a 120mm fan with 25mm thickness, the common size for 120mm case and cooler mounts. It uses a 4-pin PWM connector plus a 3-pin ARGB connector for lighting.















