| Model | ZW-140B |
|---|---|
| Size | 140 mm |
| Thickness | 26 mm |
| Speed range | 800–1800 RPM |
| Max airflow | 93.73 CFM |
| Max pressure | 1.97 mmH₂O |
| Max noise | 36.2 dBA |
| Connector | PWM 4-Pin + ARGB 3-Pin |
| Lighting | ARGB |
| Colour | Black |
ZW-140B is a 26 mm thick 140 mm fan reaching 1800 RPM with 93.73 CFM and 1.97 mmH2O static pressure
More JONSBO fans · All 140mm models · Browse the full fan database
About the JONSBO ZW-140B ARGB 140mm Fan (Black 3-Fan Unified Frame)
The ZW-140B is a 140mm, 26mm-thick fan running from 800 to 1800 RPM. Its 93.73 CFM airflow is high for the size, which suits open case ventilation and rear or top exhaust, while the 1.97 mmH2O static pressure is modest, so it is a better fit for low-restriction airflow positions than for pushing through thick radiators or dense filters. At full speed JONSBO rates it at 36.2 dB(A), so expect audible noise near 1800 RPM and a quieter result toward the 800 RPM floor.
Mounting uses a PWM 4-pin connector for speed control plus a separate ARGB 3-pin header for the lighting, so your board or controller needs both. The black finish and unified three-fan frame are aimed at matching multi-fan setups. The data does not list a price, release year, bearing type or MTBF, so those details cannot be confirmed here. Check your case clearance for 140mm by 26mm fans before ordering.
Frequently asked questions
Is the JONSBO ZW-140B ARGB fan quiet at full speed?
JONSBO rates it at 36.2 dB(A) at its 1800 RPM maximum, which is audible. It runs as low as 800 RPM via PWM, so you can lower speed and noise if your thermals allow.
Is the ZW-140B better for case airflow or radiators?
Its 93.73 CFM airflow is strong, but static pressure is only 1.97 mmH2O. That favours open case intake and exhaust positions rather than thick radiators or dense filters, where higher pressure is usually preferred.
What connectors does the ZW-140B need, and does it fit a 140mm mount?
It uses a PWM 4-pin for fan speed and a separate ARGB 3-pin for lighting, so both headers are needed. It measures 140mm across and 26mm thick, so confirm your case or cooler clears that thickness.











