| Model | AX140 PWM |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 90.5 CFM |
| Max pressure | 2.9 mmH₂O |
| Max noise | 27.9 dBA |
| Bearing | Sleeve Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | Black |
AX140 PWM is a 140 mm 25 mm black fan rated 600-1600 RPM 90.5 CFM and 2.9 mmH2O 27.9 dBA with ARGB lighting
More Montech fans · All 140mm models · Browse the full fan database
About the MONTECH AX140 PWM Fan
The MONTECH AX140 PWM is a 140mm, 25mm-thick fan built around a 600–1600 RPM range. Its 90.5 CFM airflow figure points to strong case ventilation, while the 2.9 mmH2O static pressure rating means it can also push through a radiator or dense mesh without being purely an airflow fan. Buyers choosing between the two roles should weigh airflow first for open case mounting and static pressure first for restricted intakes or liquid-cooling radiators.
At a rated 27.9 dB(A), expect the AX140 PWM to be audible near its 1600 RPM ceiling and quieter toward the 600 RPM floor, though the data does not list a measured noise curve. The Sleeve Bearing is a simple, low-cost bearing type. Mounting is standard 140mm with 25mm thickness, and the 4-pin PWM plus 3-pin ARGB connectors require a PWM header and an ARGB header. The data does not list a price or release year.
Frequently asked questions
Is the MONTECH AX140 PWM quiet?
Montech rates it at 27.9 dB(A) at up to 1600 RPM. That is the only noise figure listed, so expect it to be most noticeable at full speed and quieter near the 600 RPM minimum. No measured noise curve is provided.
Is the AX140 PWM better for case airflow or a radiator?
It lists 90.5 CFM airflow and 2.9 mmH2O static pressure, so it suits both roles. The high CFM favors open case ventilation, while the 2.9 mmH2O rating gives it enough pressure for radiators and restricted intakes.
What connectors and size does the AX140 PWM need?
It is a 140mm fan with 25mm thickness, so it fits standard 140mm mounts. It uses a 4-pin PWM connector for speed control plus a separate 3-pin ARGB connector, so your motherboard or controller needs both headers.















