MONTECH RX140 PWM Fan

Specifications
ModelRX140 PWM
Size140 mm
Thickness25 mm
Speed range600–1600 RPM
Max airflow90.5 CFM
Max pressure2.9 mmH₂O
Max noise27.9 dBA
BearingHydraulic Bearing
Connector4-pin PWM + 3-pin ARGB
LightingARGB
ColourBlack

RX140 PWM is a 140 mm 25 mm black fan rated 600-1600 RPM 90.5 CFM and 2.9 mmH2O 27.9 dBA with ARGB lighting

More Montech fans · All 140mm models · Browse the full fan database

About the MONTECH RX140 PWM Fan

The MONTECH RX140 PWM is a 140mm, 25mm-thick fan built around a hydraulic bearing and rated for 600 to 1600 RPM. Its 90.5 CFM airflow figure points to strong open-air movement, making it a natural fit for case intake or exhaust where you want volume rather than obstruction-crushing pressure. The 2.9 mmH2O static pressure rating is moderate, so it can also push through a radiator or dense mesh, but the airflow number is the headline for general chassis ventilation.

At a rated 27.9 dB(A), expect the fan to be audible near its 1600 RPM ceiling and much quieter toward the 600 RPM floor, though the data does not list a per-RPM noise curve. The 4-pin PWM connector lets a motherboard control speed, while the separate 3-pin ARGB header handles lighting, so your board needs an ARGB header or adapter. The frame is 140mm with 25mm thickness, so confirm your case and mounting points accept that size. Price and release year are not listed in the data.

Frequently asked questions

Is the MONTECH RX140 PWM quiet enough for a low-noise build?

The manufacturer rates it at 27.9 dB(A), which is the only noise figure listed. It runs from 600 to 1600 RPM, so lowering PWM speed toward the 600 RPM floor should reduce noise, but the data does not include a per-RPM noise curve.

Is the RX140 PWM better for case airflow or for a radiator?

It offers 90.5 CFM airflow with 2.9 mmH2O static pressure. The high airflow suits case intake and exhaust, while the moderate static pressure means it can also handle radiators or mesh, though the data gives no radiator performance figures.

What connectors does the MONTECH RX140 PWM need, and does it fit a 140mm mount?

It uses a 4-pin PWM connector for fan speed plus a separate 3-pin ARGB connector for lighting, so your motherboard needs an ARGB header or adapter. It is a 140mm fan with 25mm thickness, so check your case and mounting points support that size.

More Montech fans

Other 140mm fans

More fans with Hydraulic Bearing

No description....

Further Reading:

Phanteks Launches T30-120 High-Performance Fan, Redefining Cooling Efficiency Standards

The renowned PC hardware brand Phanteks has officially released the PH-F120T30 (T30-120) high-performance cooling fan, garnering significant attent...

ahuahua
2025-10-21

SilverStone Shark Force 160 ARGB Fan: 160mm Cooling with 140mm Mounting

SilverStone Shark Force 160 ARGB Fan: 160mm Cooling with 140mm Mounting160mm diameter, 160 CFM airflow, 140mm mounting compatibilitySilverStone tod...

ahuahua
2025-10-27

ASUS ROG Launches STRIX XF120 “Wind God” Fan: Magnetic Levitation Technology Redefines Silent Cooling Performance

TAIPEI, TAIWAN – ASUS Republic of Gamers (ROG) today announced the launch of its first standalone cooling fan, the ROG STRIX XF120, designed to compet

ahuahua
2025-10-27

Noctua Launches Next-Generation 120mm Flagship Fan: NF-A12x25 G2, with Significant Improvements in Quietness and Performance

The Austrian cooling specialist's latest offering sets a new benchmark in noise reduction and cooling efficiency.

ahuahua
2025-10-25

SilverStone Releases Industrial-Grade Fan FHL120: LCP Blades and Dual Ball Bearings for High Static Pressure Cooling

SilverStone Releases Industrial-Grade Fan FHL120: LCP Blades and Dual Ball Bearings for High Static Pressure CoolingOctober 27, 2025 — SilverStone ...

ahuahua
2025-10-27
    返回顶部