| Model | RX140 PWM |
|---|---|
| Size | 140 mm |
| Thickness | 25 mm |
| Speed range | 600–1600 RPM |
| Max airflow | 90.5 CFM |
| Max pressure | 2.9 mmH₂O |
| Max noise | 27.9 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
RX140 PWM is a 140 mm 25 mm white fan rated 600-1600 RPM 90.5 CFM and 2.9 mmH2O 27.9 dBA with ARGB lighting
More Montech fans · All 140mm models · Browse the full fan database
About the MONTECH RX140 PWM White Fan
The MONTECH RX140 PWM White is a 140 mm, 25 mm thick fan rated from 600 to 1600 RPM. Its 90.5 CFM airflow and 2.9 mmH2O static pressure make it a balanced choice: the pressure figure suits radiators, heatsinks and mesh-front intakes, while the airflow figure keeps open case ventilation effective. Buyers should treat 27.9 dB(A) as the manufacturer's noise rating rather than a measured result, so expect the fan to be quieter near its 600 RPM minimum and louder toward 1600 RPM.
Mounting uses standard 140 mm spacing at 25 mm thickness, so check clearance for thick radiators and top-mounted positions. The 4-pin PWM connector allows speed control from a motherboard header, and the separate 3-pin ARGB connector requires an ARGB header or controller for the white fan's lighting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the MONTECH RX140 PWM White quiet?
Montech rates it at 27.9 dB(A), and it runs from 600 to 1600 RPM. Lower speeds should be quieter, but the data lists no measured noise results, so treat 27.9 dB(A) as the manufacturer figure.
Is the RX140 PWM White best for radiators or case airflow?
It suits both reasonably. Its 2.9 mmH2O static pressure helps push air through radiators, heatsinks and filters, while 90.5 CFM supports open case ventilation. Match speed to the restriction you have.
What connectors does the MONTECH RX140 PWM White need?
It uses a 4-pin PWM connector for fan speed control and a separate 3-pin ARGB connector for lighting. Your motherboard or controller needs a matching ARGB header to use the white fan's lighting.















