| Model | YE1203 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 500–1500 RPM |
| Max airflow | 61.0 CFM |
| Max noise | 28.9 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM + 3-pin ARGB |
| Lighting | ARGB |
| Colour | White |
YE1203 is a 120 mm 25 mm white fan rated 500-1500 RPM 61.0 CFM and 28.9 dBA with ARGB lighting
More SAMA fans · All 120mm models · Browse the full fan database
About the SAMA YE1203 3-in-1 Kit White White Fan
The SAMA YE1203 kit gives you three 120mm by 25mm white ARGB fans rated from 500 to 1500 RPM. At 61.0 CFM the airflow figure points to a case-ventilation role, moving air through open mesh or a spacious chassis rather than pushing through dense radiators or thick dust filters, where static pressure matters more. The 28.9 dB(A) rating is the manufacturer's figure at its tested speed, so expect the low 500 RPM end to run quieter than the top 1500 RPM setting.
Each fan uses a hydraulic bearing, a 4-pin PWM connector for speed control and a separate 3-pin ARGB header for lighting, so your motherboard needs both a PWM fan header and an ARGB header to use them fully. The 25mm thickness is the standard 120mm frame depth, fitting most case mounts and cooler brackets. The data does not list a price or release year, so check the retailer for current pricing.
Frequently asked questions
Is the SAMA YE1203 kit quiet enough for a bedroom PC?
The rated noise is 28.9 dB(A), and the fans start as low as 500 RPM, so the lower end of the range should be the quieter setting. The data does not provide noise figures for each individual speed.
What is the SAMA YE1203 3-in-1 kit best used for?
With 61.0 CFM airflow and a 25mm frame, these 120mm fans suit case ventilation and airflow-focused builds. The data does not list a static pressure value, so radiator or dense filter use is not confirmed by the manufacturer.
Do the SAMA YE1203 fans need a special motherboard header for ARGB?
Yes. Each fan uses a 4-pin PWM connector plus a separate 3-pin ARGB connector, so you need both a PWM fan header and an ARGB header on your motherboard or controller. The data does not list included adapters or a hub.














