| Model | ZM-DF120 |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 600–2000 RPM |
| Max airflow | 70.05 CFM |
| Max noise | 34.5 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
ZM-DF120 is a 120 mm 26 mm black fan rated 600-2000 RPM 70.05 CFM and 34.5 dBA with ARGB lighting
More Zalman fans · All 120mm models · Browse the full fan database
About the Zalman ZM-DF120 Black Fan
The Zalman ZM-DF120 Black is a 120mm fan with a 26mm frame, so it fits standard 120mm case and cooler mounts, though the extra 1mm over a typical 25mm fan is worth checking against tight clearances. Its 600–2000 RPM range is driven by a 4-pin PWM connector, letting the motherboard scale speed with load. At the top end it moves 70.05 CFM, which suits case intake and exhaust where open airflow matters more than pressure against dense fins or filters. Buyers pushing air through radiators or restrictive mesh should weigh that airflow figure against static-pressure needs, which the data does not list.
Noise is rated up to 34.5 dB(A) at maximum speed, so expect audible output near 2000 RPM and quieter running toward the 600 RPM floor. The hydraulic bearing is listed as the bearing type, and ARGB lighting is included in the black frame. The data does not list a price, release year, or included accessories, so confirm those with the retailer.
Frequently asked questions
Is the Zalman ZM-DF120 Black quiet enough for a bedroom PC?
The data rates it up to 34.5 dB(A) at its 2000 RPM maximum, so it will be audible at full speed. Its 600 RPM minimum and PWM control let you run it slower for quieter operation, but no lower-speed noise figure is listed.
What is the Zalman ZM-DF120 Black best used for?
With 70.05 CFM airflow at up to 2000 RPM, it suits case intake and exhaust where open airflow is the priority. The data does not list a static-pressure rating, so radiator or dense-filter use cannot be confirmed from the specs alone.
Does the Zalman ZM-DF120 Black have RGB and what connector does it use?
Yes, it lists ARGB lighting in a black frame. It connects via a 4-pin PWM header for speed control. The data does not list a separate ARGB connector type or any included controller, so check your motherboard's lighting support.













