| Model | ZM-AF120 ARGB BLACK |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 600–2000 RPM |
| Max airflow | 69.12 CFM |
| Max pressure | 2.01 mmH₂O |
| Max noise | 29.7 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | Black |
ZM-AF120 ARGB BLACK is a 120 mm 26 mm black fan rated 600-2000 RPM 69.12 CFM and 2.01 mmH2O 29.7 dBA
More Zalman fans · All 120mm models · Browse the full fan database
About the Zalman ZM-AF120 ARGB Black Fan
The Zalman ZM-AF120 ARGB Black balances airflow and pressure for a 120mm fan. Its 69.12 CFM airflow suits open case intake and exhaust positions, while the 2.01 mmH2O static pressure means it can also push through a radiator or dense mesh without being purely a pressure fan. The 600 to 2000 RPM range lets you tune between quiet idle running and maximum cooling.
At full speed the rated noise is 29.7 dB(A), so expect audible airflow at 2000 RPM and quieter operation toward the 600 RPM floor. The hydraulic bearing is a long-life type, though the data does not list an MTBF figure. Mounting uses standard 120mm spacing with a 26mm thickness, so check clearance in tight builds. The 4-pin PWM connector supports speed control, and ARGB lighting needs an ARGB header. Price and release year are not listed in the provided data.
Frequently asked questions
Is the Zalman ZM-AF120 ARGB Black quiet enough for a low-noise build?
The rated noise is 29.7 dB(A) at maximum 2000 RPM. Because it supports PWM from 600 RPM, you can lower speed for quieter operation, but the data does not provide noise figures for lower RPM settings.
Is this fan better for a radiator or for case airflow?
It offers 69.12 CFM airflow with 2.01 mmH2O static pressure, so it works for both case airflow and moderately restrictive radiators or mesh. The data does not include radiator-specific performance results.
What connector and lighting does the ZM-AF120 ARGB Black need?
It uses a 4-pin PWM connector for fan speed control and ARGB lighting, so your motherboard or controller needs an ARGB header. The fan is 120mm in diameter and 26mm thick, so confirm clearance.













