| Model | Twister ARGB 120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 33.1 CFM |
| Max pressure | 1.0 mmH₂O |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin |
| Lighting | ARGB |
| Colour | White |
Twister ARGB 120 is a 120 mm 25 mm white fan rated 1200 RPM 33.1 CFM and 1.0 mmH2O with ARGB lighting
More SAMA fans · All 120mm models · Browse the full fan database
About the SAMA Twister ARGB 120 White Fan
The SAMA Twister ARGB 120 White is a 120mm fan with a 25mm thickness and a fixed 1200 RPM speed, so there is no PWM range to tune. Its 33.1 CFM airflow and 1.0 mmH2O static pressure suit low-resistance case ventilation and open-airflow mounting better than dense radiators or heavily filtered intakes, where higher pressure is usually wanted. Because the speed is fixed, expect a steady single noise level rather than a ramp, though the manufacturer data does not list a dB figure.
Mounting uses standard 120mm spacing, and the 6-pin connector is a proprietary ARGB-style link rather than a common 4-pin PWM header, so check that your case or controller supports it before buying. The hydraulic bearing is listed for the fan hub. Colour is white with ARGB lighting. The data does not list a price or release year, so confirm those with the retailer.
Frequently asked questions
Is the SAMA Twister ARGB 120 White quiet?
The manufacturer data does not list a noise level in dB, so a quiet rating cannot be confirmed from the specs. It runs at a fixed 1200 RPM, meaning one steady speed rather than a variable ramp, and uses a hydraulic bearing.
What is the SAMA Twister ARGB 120 White best for?
With 33.1 CFM airflow and 1.0 mmH2O static pressure at 1200 RPM, it suits case ventilation and low-resistance airflow positions. Its modest pressure makes it less ideal for dense radiators or heavily restricted intakes that need higher pressure.
Does the SAMA Twister ARGB 120 White fit a standard 120mm mount?
Yes, it is a 120mm fan with 25mm thickness, which matches common 120mm case and cooler mounting spacing. Its connector is a 6-pin ARGB type rather than a standard 4-pin PWM header, so verify your controller or case supports that connection.














