| Model | Twister ARGB 120 |
|---|---|
| Size | 120 mm |
| Thickness | 25 mm |
| Speed range | 1200–1200 RPM |
| Max airflow | 33.1 CFM |
| Max pressure | 1.0 mmH₂O |
| Bearing | Hydraulic Bearing |
| Connector | 6-pin |
| Lighting | ARGB |
| Colour | Black |
Twister ARGB 120 is a 120 mm 25 mm black fan rated 1200 RPM 33.1 CFM and 1.0 mmH2O with ARGB lighting
More SAMA fans · All 120mm models · Browse the full fan database
About the SAMA Twister ARGB 120 Black Fan
The SAMA Twister ARGB 120 Black is a 120mm fan with a 25mm frame that runs at a fixed 1200 RPM, delivering 33.1 CFM of airflow and 1.0 mmH2O of static pressure. That balance suits case ventilation and light restriction rather than dense radiators or thick dust filters, where higher static pressure helps. Because the speed is fixed at 1200 RPM, the manufacturer data lists no RPM range and no noise figure, so check the spec sheet for a sound rating before buying if silence is critical.
Mounting follows standard 120mm spacing, and the 25mm thickness fits common case and cooler clearances. The connector is a 6-pin design, not the usual 4-pin PWM or 3-pin header, so confirm your motherboard or controller accepts it. ARGB lighting is included in the black frame. The data does not list a price or release year, so verify current pricing with the retailer.
Frequently asked questions
Is the SAMA Twister ARGB 120 Black quiet?
The manufacturer data does not list a noise level or dBA figure for this fan. It runs at a fixed 1200 RPM, so check the retailer or spec sheet for a sound rating before buying if quiet operation matters to you.
What is the SAMA Twister ARGB 120 Black best for?
With 33.1 CFM airflow and 1.0 mmH2O static pressure at 1200 RPM, it suits case ventilation and low-restriction mounts. Dense radiators or thick filters usually want higher static pressure than the 1.0 mmH2O listed here.
Does the SAMA Twister ARGB 120 Black fit a standard 120mm mount?
Yes, it is a 120mm fan with a 25mm thickness, which matches common 120mm case and cooler spacing. Confirm clearance for the 25mm depth and check that your header or controller supports the 6-pin connector.













