| Model | ZM-AF120 ARGB WHITE |
|---|---|
| Size | 120 mm |
| Thickness | 26 mm |
| Speed range | 600–2000 RPM |
| Max airflow | 69.12 CFM |
| Max pressure | 2.01 mmH₂O |
| Max noise | 29.7 dBA |
| Bearing | Hydraulic Bearing |
| Connector | 4-pin PWM |
| Lighting | ARGB |
| Colour | White |
ZM-AF120 ARGB WHITE is a 120 mm 26 mm white fan rated 600-2000 RPM 69.12 CFM and 2.01 mmH2O 29.7 dBA
More Zalman fans · All 120mm models · Browse the full fan database
About the Zalman ZM-AF120 ARGB White Fan
The Zalman ZM-AF120 ARGB White is a 120mm fan with a 26mm frame, so it fits standard 120mm mounts but sits slightly deeper than a typical 25mm fan, which matters in tight builds. Its 69.12 CFM airflow is the headline figure, while 2.01 mmH2O static pressure is modest, so it suits open case ventilation and low-restriction mesh or grille positions better than dense radiators or thick dust filters. The 600–2000 RPM range gives a wide spread between near-silent idle running and full-speed cooling.
At maximum speed Zalman rates noise at 29.7 dB(A), so expect the fan to be audible when pushed to 2000 RPM and quieter toward the 600 RPM floor. The 4-pin PWM connector allows motherboard speed control, and the hydraulic bearing is specified for the fan's lifespan, though the data does not list an MTBF figure or a price. ARGB lighting is included, and the white colour is a cosmetic match for light-themed builds.
Frequently asked questions
Is the Zalman ZM-AF120 ARGB White quiet?
Zalman rates it at 29.7 dB(A) at its 2000 RPM maximum. With PWM control down to a 600 RPM minimum, you can run it slower for less noise, though the data does not list a separate noise figure for lower speeds.
Is this fan good for a radiator or CPU cooler?
Its 2.01 mmH2O static pressure is modest, so it is better suited to case airflow than dense radiators. The 69.12 CFM airflow figure makes it a reasonable choice for open ventilation and low-restriction mesh or grille mounting.
Will the Zalman ZM-AF120 ARGB White fit my case?
It is a 120mm fan with a 26mm thickness, so it fits standard 120mm mounting holes but is 1mm deeper than common 25mm fans. Check clearance in tight spots. It uses a 4-pin PWM connector and includes ARGB lighting.













