| Model | TL-B12 Extrem LCP |
|---|---|
| Size | 120 mm |
| Thickness | 25.6 mm |
| Speed range | –2150 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 28.1 dBA |
| Bearing | Dual Ball Bearing |
| Connector | 4-pin PWM |
| Lighting | None |
| Colour | Black |
TL-B12 Extrem LCP is a liquid crystal polymer frame with ball bearings rated up to 2150 rpm with 69 CFM
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-B12 Extrem LCP 120mm Non-LED Fan
The TL-B12 Extrem LCP is a 120mm, 25.6mm-thick fan rated at 2150 RPM, moving 69 CFM against 2.87 mmH2O of static pressure. That balance of airflow and pressure suits both case ventilation and denser heatsinks or radiators, where pressure matters more than raw CFM. Buyers pushing through filters or fins should weight the 2.87 mmH2O figure; open case airflow leans on the 69 CFM.
Noise is listed at 28.1 dB(A) at full speed, so expect an audible but moderate fan at 2150 RPM and quieter running under PWM control. The dual ball bearing is a durability-oriented choice, though the data does not list an MTTF or warranty figure. Mounting is standard 120mm with 25.6mm thickness, so check clearance for clips and tight builds. The 4-pin PWM connector fits standard motherboard headers, there is no lighting, and the colour is black. Price and release year are not listed in the data.
Frequently asked questions
Is the TL-B12 Extrem LCP quiet at full speed?
Thermalright rates it at 28.1 dB(A) at its 2150 RPM maximum. That is a moderate noise figure rather than a silent one, and PWM control lets you run it slower for lower noise, though the data does not list noise at reduced speeds.
Is this fan better for a radiator or for case airflow?
It offers 69 CFM airflow and 2.87 mmH2O static pressure, so it can serve either role. The pressure figure makes it a reasonable candidate for radiators and dense heatsinks, while the airflow suits open case ventilation.
Does the TL-B12 Extrem LCP have RGB lighting?
No. The manufacturer data lists lighting as none, and the fan colour is black. It uses a standard 4-pin PWM connector for speed control, so any lighting would have to come from elsewhere in the build.















