| Model | TL-B12R-S |
|---|---|
| Size | 120 mm |
| Thickness | 25.6 mm |
| Speed range | –2150 RPM |
| Max airflow | 69 CFM |
| Max pressure | 2.87 mmH₂O |
| Max noise | 28.1 dBA |
| Bearing | S-FDB V2 Bearing |
| Connector | 4-pin PWM + 3-pin 5V ARGB |
| Lighting | ARGB |
| Colour | Black |
TL-B12R-S is a reverse blade ARGB pressure model rated up to 2150 rpm with 69 CFM and 2.87 mmH2O static pressure
More Thermalright fans · All 120mm models · Browse the full fan database
About the TL-B12R-S 120mm ARGB Fan
The TL-B12R-S balances airflow and pressure rather than leaning to one extreme. Its 69 CFM airflow suits open case ventilation, while 2.87 mmH2O static pressure is the more useful figure when air must push through a dense radiator, heatsink fin stack or restrictive mesh front. Buyers choosing between the two should weight static pressure if a radiator or cooler sits directly behind the fan.
At 2150 RPM the rated noise is 28.1 dB(A), so expect a noticeable but moderate sound level at full speed, with PWM control letting the fan slow down when load drops. The 120 mm diameter and 25.6 mm thickness fit standard 120 mm mounts, and the 4-pin PWM plus 3-pin 5V ARGB connector means a motherboard header for speed control and an ARGB header for lighting. The data does not list a price or release year.
Frequently asked questions
Is the Thermalright TL-B12R-S quiet at full speed?
Thermalright rates it at 28.1 dB(A) at its maximum 2150 RPM, which is a moderate rather than silent level. Because it uses 4-pin PWM, you can lower the speed and noise when full airflow is not needed.
Is the TL-B12R-S better for a radiator or for case airflow?
It offers both 69 CFM airflow and 2.87 mmH2O static pressure. The static pressure figure makes it a reasonable choice for pushing through a radiator, heatsink or restrictive mesh, while the airflow rating also suits general case ventilation.
What connectors does the TL-B12R-S need and will it fit my case?
It uses a 4-pin PWM connector for fan speed and a separate 3-pin 5V ARGB connector for lighting, so your motherboard needs both headers. Its 120 mm diameter and 25.6 mm thickness fit standard 120 mm fan mounts.















